|
| 克魯勃潤(rùn)滑油系列 > 克魯勃潤(rùn)滑油脂字母P系列 > PETAMO GHY 443/kuber PETAMO GHY443 |
| PETAMO GHY 443/kuber PETAMO GHY443 詳細(xì)說(shuō)明 （瀏覽1408次） |
PETAMO GHY 441, 443
High-temperature greases with high load carrying capacity
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader
with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected
product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing.
Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time without notice.
Klüber Lubrication München KG, a member of the Freudenberg group
Publisher and Copyright: Reprints, total or in part, are permitted if source Klüber Lubrication München KG
Klüber Lubrication München KG is indicated and voucher copy is forwarded. Geisenhausenerstra?e 7, 81379 München, Deutschland
+49 89 7876-0, Telefax +49 89 7876-333, www.klueber.com
Product information 5.560 e Edition 10.03
Article number: 094051, 094052 GATE-B/HS
PETAMO GHY 441, 443
? Long-term and lifetime
lubrication
? High thermal stability
? Good wear protection
? Good corrosion protection
? Good sealing effect
? High ageing and oxidation
resistance
Product data
PETAMO GHY 441 PETAMO GHY 443
Service temperature range*,
°C, approx. –30 to 180 –20 to 180
Colour light beige beige
Texture homogeneous,
fibrous
homogeneous
fibrous
Drop point, DIN ISO 2176, °C > 250 > 250
Worked penetration, DIN ISO
2137, (0.1 mm)
310 to 340 250 to 280
Speed factor**, (n x dm) 250,000 250,000
Flow pressure, DIN 51805
at –20 °C, mbar
at –30 °C, mbar < 1400
< 1400
Base oil viscosity, DIN 51562,
part 01
at 40 °C, mm2/s, approx.
at 100 °C, mm2/s, approx.
440
38
440
38
Rolling bearing grease test
FAG FE8, angular contact
thrust ball bearing,
7.5 min-1/80 kN, rolling
bearing wear
... passed
* Service temperatures are guide values which depend on the lubricant's composition, the intended use and the application
method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechanodynamical
loads, time, pressure and temperature. These changes in product characteristics may affect the function of a
component.
** Speed factors are guide values which depend on the type and size of the rolling bearing type and the local operating
conditions, which is why they have to be confirmed in tests carried out by the user in each individual case.
Description
PETAMO GHY 443 and
PETAMO GHY 441 are special
lubricating greases based on ester
oil and polyurea thickener. They are
used for long-term and lifetime
lubrication of rolling and plain
bearings subject to high loads and
elevated temperatures. PETAMO
GHY 441 and 433 incorporate high
viscosity base oils with excellent
thermal stability. Manufactured in
differing NLGI consistency classes
PETAMO greases cover a wide
range of applications and conditions.
Application
High-temperature lubrication of
rolling bearings, plain bearings,
electric motor bearings, load rollers
in conveyors, roller bearings in
continuous wood panel presses,
load rollers in continuous casting
machines.
Application notes
PETAMO greases can be applied by
spatula, brush, pressure grease gun
or via centralized lubrication
systems. (Petamo GHY 441 is the
preferred grade for automatic
dispensing). Prior to initial
application please check
compatibility with current greases
and pre clean bearings, where
necessary.
Minimum shelf life
The minimum shelf life is approx. 24
months if the product is stored in its
unopened original container in a dry
place.
Pack sizes
400 g grease cartridge
1 kg can
25 kg bucket |
|
|
