|
| 克魯勃潤(rùn)滑油系列 > 克魯勃潤(rùn)滑油脂字母P系列 > PETAMO GY 193/kluber PETAMO GY193 |
| PETAMO GY 193/kluber PETAMO GY193 詳細(xì)說明 （瀏覽1403次） |
PETAMO? GY 193
Lubricating grease for high-temperature and
long-term lubrication of rolling bearings
Product information 5.539 e Edition 06.03
GATE-B/TB
Product data
Chemical structure, oil type ester oil
Chemical structure, thickener polurea
Service temperature range* [°C], approx. –20 to 180
Colour beige
Texture homogeneous, fibrous
Drop point, DIN ISO 2176 [°C] ≥ 240
Cone penetration of lubricating greases,
DIN ISO 2137, worked penetration, 25 °C,
[0.1 mm]
270 to 310
Density at 20 °C [g/cm3], approx. 1.03
Kinematic viscosity of the base oil,
DIN 51562 pt. 01, Ubbelohde, 40 °C [mm2/s],
approx.
160
Speed factor** (n x dm) [mm/min], approx. 400,000
Flow pressure, DIN 51805, -20 °C, mbar < 1400
* Service temperatures are guide values which depend on the lubricant's composition, the intended use and the application
method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechano-dynamical
loads, time, pressure and temperature. These changes in product characteristics may affect the function of a component.
** Speed factors are guide values which depend on the type and size of the rolling bearing type and the local operating conditions,
which is why they have to be confirmed in tests carried out by the user in each individual case.
PETAMO GY 193
? High temperature lubricant
? Long term and lifetime lubrication
product
? Excellent resistance to water
Description
PETAMO GY 193 is a synthetic
high-temperature grease based on a
high-quality ester oil, polyurea thickener
and special additives. The
grease offers excellent water resistance
and corrosion protection. With
an above average base oil viscosity
of approximately
160 mm2/s at 40°C, PETAMO GY
193 is the ideal selection for applications
where high temperatures and
medium to high load conditions apply.
Application
Depending on the service temperature,
PETAMO GY 193 can be used
for long-term lubrication and lifetime
lubrication conditions as well as for
applications requiring more frequent
relubrication. Experience has shown
that lifetime lubrication is possible
with temperatures below 150°C, for
example in electric motors, fans,
carrier and guide rollers, chain
wheels, sealed or shielded rolling
bearings. In relubricatable rolling
bearings subject to very high temperatures
the grease can be used up
to 180°C (e.g. driers). PETAMO GY
193 should be selected primarily for
lubrication of bearings with point
contact loading, but can also be
used for bearings with linear contact
loading and a high share of sliding
friction.
Application notes
PETAMO GY 193 can be applied by
spatula, grease gun or centralized
lubrication systems.
Minimum shelf life
The minimum shelf life is approx. 36
months if the product is stored in its
closed original container in a dry
place.
Pack sizes
1 kg can
25 kg bucket
180 kg drum
400 g cartridge |
|
|
